We help people repair plastic
Information
3AG 1-1/4" x 1/4" 8A fuse
URE6053-02 URE6053-02 POL6053-02 URA6053-02 UR6053-02 PLY6053-02 SKU 6053-02 URT-6053-02 URT6053-02 605302 US-6053-02 URE.6053-02 URE-6053-02 PLV6053-02 PLV-6053-02
$3
Part No.:6053-02
Weight: 0.06 LB
Length: 0.00 IN
Height: 0.00 IN
Width: 0.00 IN
Accepted Payments:
Visa, MC, American Express, Discover, PayPal
3AG 1-1/4" x 1/4" 8A fuse
This 3AG 1-1/4" x 1/4" 8 amp fuse is used in some of Polyvance's nitrogen plastic welding systems. The "AG" stands for "automotive glass," but that only describes the appearance, because these fuses are ceramic, slow-blow fuses that are the same shape as automotive glass fuses.
This part is/was used in...
- 6053 - E-Z Weld 2.0 Hot Air Welder
- 6053N2 - Nitrogen Air Controller
- 6056 - Nitrogen Welding System
- 6057 - Nitro Fuzer Nitrogen Welder
- 6057-C - Nitro Fuzer Welding System
Frequently Asked Questions (FAQ's)
How do I test my fuse to see if it is good?
You will need a multi-meter, or an ohm meter. On your multi-meter, turn the settings to "ohms".
You should get a reading above zero. It usually reads from 0.3 to 0.5 ohms. If it is an open circuit (meaning the fuse is bad), you will not get a reading.
High Resolution Image(s) (opens in a new tab/window)
This page was created on October 11, 2022
URE6053-02 POL6053-02 URA6053-02 UR6053-02 PLY6053-02 SKU 6053-02 URT-6053-02 URT6053-02 605302 US-6053-02 URE.6053-02 URE-6053-02 PLV6053-02 PLV-6053-02
