Plastic repair GURUS since 1981
Information
6049-C Nitro Fuzer Lite Parts List (Welding Rods NOT listed)
| Image | Qty | Part No. and Description | More info |
|---|---|---|---|
 |
1 | 2045W Stainless Steel Reinforcing Mesh |
 |
 |
1 | 5003-01 Plastic welding rod organizer case |
|
 |
1 | 6012-P Airless Element Assembly |
|
 |
1 | 6020 Temperature Control Switch |
|
 |
1 | 6027HT Standard Airless Welding Tip |
|
 |
1 | 6031 Teardrop shaped, flat airless welding tip |
|
 |
1 | 6049-02 Control knob for temperature controller |
|
 |
2 | 6049-03 Flow Contol Valve with Micro-Fine Needle |
|
 |
1 | 6049-04 218 8A 205VAC Fuse |
|
 |
2 | 1/4 in. tube X 10/32 Straight Fitting |
|
 |
2 | 6049-06 1/4 in. X 10/32 90-degree Fitting |
|
 |
1 | 6049-07 Inlet receptacle with switch and fuse |
|
| 1 | 6049-08 Wiring Harness |
|
|
 |
1 | 6050-NR1 Hot Air All-Purpose Tip |
|
 |
11 | 6052-33 PUR tubing 1/4" Green |
|
 |
1 | 6053N2-03 Straight, push-connect tube fitting |
|
 |
4 | 6053N2-04 90-degree Push-Connect Tube Fitting |
|
 |
1 | 6053N2-07 Three-Way Ball Valve |
|
 |
2 | 6053N2-08 90 degree Bulkhead Push-Connect Tube fitting for 1/4" tubing |
|
 |
1 | 6056-05 Air Manifold |
|
 |
1 | 6056-06 Poser Strip |
|
 |
1 | 6056-07 Nitrogen Bottle Regulator |
|
 |
1 | 6056-08 Mig Cart for Nitrogen Plastic Welder |
|
 |
1 | 6056-11 1/4" Galvanized Pipe Plug |
|
 |
2 | 6056-12 6" Gray Wheel |
|
 |
2 | 6056-13 2" Gray Caster With Brake and 1.5" Brass Ring Stem |
|
 |
2 | 6056-14 Washer for cart wheels |
|
 |
2 | 6056-15 1/2" Cap nut washer. |
|
 |
1 | 6057-02 Flow Gauge |
|
 |
1 | 6057-05 Snap-in recepticle |
|
 |
2 | 6057-15 1/8" M NPT to 1/4" tube push connect fitting |
|
 |
1 | 6057-17 Pressure Switch |
|
 |
1 | 6057-18 Barbed tube - thru wall - 1/2" diameter |
|
 |
1 | 6057-19 Run Tee 1/4" OD Tube X 1/4" NPT X 1/4" OD Tube w/1.5mm Orifice |
|
 |
4 | 6057-20 Rubber Feet |
|
 |
2 | 6057-21 18.0-15.5 mm SS pinch clamp |
|
 |
1 | 6057-22 1/4" Threaded Tee brass fitting. |
|
 |
1 | 6057-23 1/4" M pipe to 1/4" compression union (no nut) |
|
 |
1 | 6057-24 61-4B Compression nut 1/4" OD |
|
 |
1 | 6057-26 18-3 SVT Int color coded wire |
|
 |
1 | 6057-27 B1000-006 Buna-N o-ring |
|
 |
10 | 6057-28 #6 X 1/2" Hex washer head machine screw |
|
 |
4 | 6057-30 #8 x 3/4" phillips pan head sheet metal screw |
|
 |
8 | 6057-31 1/8" x 1/8" steel pop rivet |
|
 |
2 | 6057-33 10-24 Hex Nylock Nut |
|
 |
2 | 6057-34 10-24 x 1-3/4" Machine Screw |
|
 |
2 | 6057-35 #10 x 1-1/4 Hex Head Screw |
|
 |
4 | 6057-37 1/4" AMP (M) QD connector |
|
 |
4 | 6057-39 Flow restrictor |
|
 |
1 | 6059-07 Silicone Heat Shrink Tube, 20mm diameter, 12 inch length |
|
 |
11.5 | 6059-08 Black silicone braided tubing |
|
 |
1 | 6062ME Hot air element - 550 watt |
|
 |
45 | 6066-09 1/4"-20 x 1/2" Hex Bolt / Zinc |
|
 |
45 | 6066-10 1/4"-20 Hex Nylock Nut |
|
 |
1 | 6085-11 F 1/8 NPT x 1/4 Hose 90 deg fitting |
|
 |
1 | 6124WB Stainless wire brush |
|
 |
1 | 6150-01 Hot air welder and nitrogen welder handle |
|
 |
1 | 6150-04 6 x 3/8 SS Oval Head Screw |
|
 |
1 | 6150-05 Flower-shaped strain relief washer |
|
 |
1 | 6150-06 Socket and ground spring assembly |
|
 |
1 | 6175-01 Stainless steel barrel |
|
 |
1 | 6175-02 Brass nut for hot air welder barrel |
|
 |
1 | CHAIN Chain set to hold nitrogen tank |
|
 |
1 | CORD6 USA Power cord |
|
 |
1 | LIGHT4 Green indicator light, 12mm |
|
 |
1 | NUT M6 Nut, Hex, #6-32 |
|
 |
2 | RIV1 3/16 in. Rivet |
|
 |
3 | RIV2 1/4 in. Rivet |
|
 |
1 | STRAIN1 Strain relief bussing |
|
 |
1 | STUD Grounding Stud |
|
 |
1 | WASHER M6 Washer, Flat, #6 (for grounding stud) |
|
