We help people repair plastic
Information
Replacement Element Assembly for JAPANESE Model 7 Airless Plastic Welder
<p>URE6012-100 URE6012-100 POL6012-100 URE6012-100 URA6012-100 sku 6012-100 6012100 UR6012-100 POL6012-100 URT6012-100 URT-6012-100 PLY6012-100 POL 6012-100 US-6012-100 PV6012-100 URE-6012-100 200W, 100V Replacement Element PLV6012-100 PLV-6012-100</p>
$64.95
Part No.:6012-100
Weight: 1.03 LB
Length: 11.00 IN
Height: 2.00 IN
Width: 4.00 IN
Accepted Payments:
Visa, MC, American Express, Discover, PayPal
IMPORTANT NOTE: This is the version for JAPAN that has 100 volt power. If you are in the US or Canada, DO NOT ORDER THIS ONE! Instead, order the 110-volt element.
This is the replacement element for the Mini-Weld Model 7 Airless Plastic Welder. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.
Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.
We got tired of dealing with suppliers who said "this is what we have to offer. Take it or leave it." So, we started from scratch and designed our own.
- We wanted an element that would last a long time, so we designed it with a ceramic element.
- We wanted an element that had a replacable heater so that you don't have to buy the entire assembly if the heater breaks or burns out.
- We wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts. This has WAY more power than most off-the-shelf elements. Most off-the-shelf elements are typically in the 40W to 80W range.
Frequently Asked Questions:
How many ohms resistance should the element show on a multi-meter when I test my element?
The resistance of the element should be in the range of 40 to 50 ohms.
I have an older Model 6 welder and the element is burned out. May I replace that element with the Ceramic element?
Yes! The 6012 Ceramic element will wire up to a Model 6 welder with no modifications necessary.
How to change the entire element assembly - VIDEO (Click or tap to expand)
How to change the ceramic heater in your element - VIDEO (Click or tap to expand)
High Resolution Image(s) (opens in a new tab/window)
URE6012-100 POL6012-100 URE6012-100 URA6012-100 sku 6012-100 6012100 UR6012-100 POL6012-100 URT6012-100 URT-6012-100 PLY6012-100 POL 6012-100 US-6012-100 PV6012-100 URE-6012-100 200W, 100V Replacement Element PLV6012-100 PLV-6012-100
