HDPE + GF15 plastic welding corner rod, 1/4" x 1/4", 30 ft., Natural

Photo

Video

$26.95

Part No.:R19-08-03-NT

Weight: 0.27 LB

Length: 12.00 IN

Height: 1.00 IN

Width: 3.00 IN

UPC: 694687006259

Also available on Amazon:

B07WFJ6PXP

Accepted Payments:

SDS

If you have a broken plastic part that has the marking "HDPE+GF15", that tells you that the part is high density polyethylene with 15% glass fibers. It may have markings like "HDPE+GF20" or "HDPE+GF30" or some other number next to GF. Whatever number follows the "GF" is the percentage of glass fibers that are in the high density polyethylene (HDPE) plastic. Since HDPE+GF15 is the only glass-filled HDPE that we offer (for now) this would be your best option whenever you have a broken, glass-fiber reinforced high density polyethylene part.

Fiberglass reinforced HDPE is used to make reusable delivery totes among other things.

This package contains 30 ft. (9.1m) of natural HDPE+GF15 plastic "corner rod". These corner rods work well for flanges where two pieces meet at a 90 degree angle. Each rod measures 12 inches (30 cm) long, 1/4th inch (6.4 mm) wide x 1/4th inch (6.4 mm) "V"-shaped rod, and there are 30 rods per pack.

How to Identify:

Symbol(s):	HDPE+GF
Float Test:	Will float if fiberglass percentage is low. Will sink if fiberglass percentage is high.
Burn Test:	Burns quickly. Drips while burning. Slight amount of black smoke.

Float and Burn Test Result Video

Here is our Plastic Welding Rod Numbering Pattern:

(NOTE: Not all rod profiles and colors are available in all plastic types)

Click on image to enlarge

High Resolution Image(s) (opens in a new tab/window)

High Resolution Image

URER19-08-03-NT POLR19-08-03-NT URER19-08-03-NT R19-O8-O3-NT R19O8O3NT URAR19-08-03-NT 694687006259 B07WFJ6PXP sku R19-08-03-NT URR19-08-03-NT POLR19-08-03-NT plastic welding sticks URTR19-08-03-NT URT-R19-08-03-NT PLYR19-08-03-NT POL R19-08-03-NT US-R19-08-03-NT PVR19-08-03-NT R19-08-XX-NT UPC694687006259 URE-R19-08-03-NT PLVR19-08-03-NT PLV-R19-08-03-NT