Plastic repair GURUS since 1981
White Bumper and Cladding Adhesion Primer - Low VOC, Quart
Weight: 2.50 LB
Volume: 1 quart
Length: 4.25 IN
Height: 4.75 IN
Width: 4.25 IN
Also available on Amazon:
Visa, MC, American Express, Discover, PayPal
3611/3612/3613 Bumper & Cladding Coat Adhesion Primer is an advanced, low-VOC, solvent-based, non-sandable primer that is
designed to stick to “problem plastics” like TEO, TPO and PP without sanding or pretreatment.
The low VOC formula, sprays smoother and has improved topcoat compatibility over the original formula, plus there is no close on the window for topcoating. The low VOCs mean it’s legal in all 50 states and Canada. (2.09 lbs./gal. VOC)
Bumper and Cladding Adhesion Primer is designed to permanently stick to the bumpers, side cladding, and trim found on many of today's cars, trucks, and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat-clearcoat will stick. Bumper and Cladding Coat Primer may be topcoated with most solvent, waterborne base/clear topcoat and single stage systems without sanding.
That’s right… scuffing and sanding is NOT necessary to get adhesion that can stand up to a pressure washer! Check out this video for proof!
High Resolution Image (opens in a new tab/window)