Plastic repair GURUS since 1981
8002 Nitro-Fuzer Nitrogen Plastic Welder, Analog, Dual Gas, With Cart
Weight: 65.00 LB
Length: 38.00 IN
Height: 42.00 IN
Width: 19.00 IN
Visa, MC, American Express, Discover, PayPal
8002 Nitro-Fuzer® Plastic Welding System
The 8002 Nitro-Fuzer® plastic welding system combines a simplified analog nitrogen welder with a traditional airless plastic welder. By combining these welders into one package, it allows you to make nitrogen welds economically to virtually any automotive plastic.
This Nitro-Fuzer® is designed to be used with compressed air and a nitrogen bottle to make the strongest possible welds. If you want continuous nitrogen without the hassle of changing the nitrogen tank, consider getting the 8003 or 8203 welders as they have nitrogen generators.
Analog Flow Gauge With Low-Flow Cutoff Protection
Unlike some competitive products, the 8002 features precision flow control so the user can match the flow and temperature to substrate types and thicknesses. The flow and temperature can be reduced to a very low point in order to weld thin, fragile substrates, something others cannot do. When welding very thick substrates, the temperature and flow can be increased greatly to allow more heat to be transferred to the weld. The analog flow gauge gives the welder a repeatable reference over how much gas is used in the welding process. To extend heating element lifespan, a low-pressure safety switch is incorporated into the system, shutting off the power to the heating element if the air flow drops below a safe level.
The integrated airless welder is ideal for smoothing out welds, and it is essential for repairing thermoset polyurethane.
In order to reduce the cost of the 8002, the welder and cart will be shipped in two separate boxes. The welder is fully assembled and ready to go, but the cart will have to be assembled. We have detailed instructions in the box, as well as a video, to help you assemble the cart. The Welding Cart Assembly instructions, Setup and Use video, and Quick-Start Guide can be found below. The 8002 is packaged with one welding rod organizer case filled with a selection of welding rods, a hand seamer, and aluminum tape. It is covered by a two-year "bumper-to-bumper" warranty covering all parts except the heating elements and misuse.
- Simple controls
Manual Air-to-Nitrogen Switching
- Manual air-to-nitrogen switching
- Flow gauge for repeatability
- Automatic low-flow safety switch
- Precision flow control
- Compact, easy-to-handle welding torch gets into tight spots with no user fatigue
- Quick-change hose and handle assembly.
- Integrated airless welder control to allow for repair of thermoset PUR
- Easily replaceable heating elements
- Heavy-duty, made-in-USA enclosure for maximum durability
- Heavy-duty welding cart (assembly required)
Video: 8002 Nitro-Fuzer® Setup and Use
Video: Introducing the 8000 Series Nitro-Fuzer® Welders
Video: How to Install the 6102 Hose and Handle Assembly
High Resolution Image (opens in a new tab/window)