We help people repair plastic
View cart
0 itemsWe help people repair plastic
Part No.:8303
Weight: 111.00 LB
Length: 38.00 IN
Height: 42.00 IN
Width: 19.00 IN
UPC: 694687007041
Accepted Payments:
The 8303 Nitro-Fuzer® Touch redefines user-friendliness with its large, intuitive touchscreen that simplifies welding with easy control functions, including temperature and gas flow. It is pre-programmed with over 20 different plastic types and their recommended temperature and airflow settings; simply select the plastic type and the welder automatically adjusts the settings.
Welding temperature and gas flow can be easily adjusted using the on-screen sliders or by entering the desired value. Precise control of the nitrogen flow allows the user to adjust to thick or thin plastics. A first in the industry, the Nitro-Fuzer® Touch features real-time airstream temperature monitoring; once the welding temperature is set, it will remain constant even if the gas flow is adjusted.
The 8303 Nitro-Fuzer® Touch uses a continuous flow of nitrogen gas thanks to the included Nitrocell nitrogen generator. Eliminating the compressed air source allows the welder to run on nitrogen 100% of the time and eliminates the need to switch back and forth from air to nitrogen. In addition to the nitrogen welder, the Nitro-Fuzer Touch includes an airless welder, which is perfect for smoothing nitrogen welds and repairing thermoset polyurethane plastics. Three organizer boxes of plastic welding rod and several welding accessories also come with the welder, allowing users to start welding plastic right away. The system is shipped completely assembled and requires only a few minutes to set up before use.
Features and Benefits:
Select the plastic type and let the welder do the rest!
Safety Features:
Warranty:
The 8303 Nitro-Fuzer nitrogen plastic welder is warranted against defects in materials and workmanship for a period of two years from the date of purchase. Any part found to be defective during the warranty period will be repaired or replaced free of charge when returned prepaid with a copy of the original invoice showing the date of purchase. An RGA (Return Goods Authorization) number must be obtained from Polyvance prior to any repair or return.
Note: No replacement will be made if the welder shows obvious signs of misuse or abuse.
The 8303 Nitro-Fuzer Touch includes a Nitrocell nitrogen generator. CLEAN, DRY, OIL-FREE AIR IS MANDATORY! Irreparable damage to the nitrogen membrane will occur if contaminated air is used and will void the warranty.
A PDF copy of the warranty is available.
Specifications:
High Resolution Image(s) (opens in a new tab/window)
This page was created on June 20, 2024
©1997-2025 - Polyvance
Programming and design:
CodeIT