Safety Data Sheet

According to GHS (Global Harmonized System) - Hazcom 2012
Date Printed (YYYY-MM-DD): 2018-04-11 

Section 1 - Product and Company Information

Product Name: Eco Clean Plastic Cleaner (Zero VOC)
Product Part Number(s): 1001-1, 1001-4
Recommended Use: To clean plastic prior to repairing.
Revision Date (YYYY-MM-DD): 2018-04-11

COMPANY IDENTIFICATION:EMERGENCY TELEPHONE NUMBER
Polyvance24 Hour Emergency ContactChemtrec - 1-800-424-9300 (Outside USA 703-527-3887)
1128 Kirk Rd.Customer Information Number256-638-4103 (7AM - 4PM (CST) M-F)
Rainsville, AL 35986
Information Email: info@polyvance.com

Section 2 - Hazards Identification

Appearance:Clear liquid
Odor:Slight, indescribable
Hazard Statement:
 CAUTION! May be harmful if swallowed. May cause an allergic skin reaction. May cause respiratory irritation.  
GHS Physical Hazard PictogramsGHS Health Hazard PictogramsGHS Environmental Hazard Pictograms
Not Applicable

Irritant

Corrosive to Skin
Not Applicable

GHS Hazards Statement Codes for This Product

Statement
Type
Statement
Code
Statement Text
Health H303 May be harmful if swallowed
Health H317 May cause an allergic skin reaction
Health H335 May cause respiratory irritation
Precautionary Statement:
 Keep out of reach of children. Do not get in eyes, on skin, or on clothing.  

GHS Precautionary Statement Codes for This Product

Statement
Type
Statement
Code
Statement Text
General P102 Keep out of reach of children
Prevention P262 Do not get in eyes, on skin, or on clothing

Potential Health Effects

Eye Contact:Irritant
 
Skin Contact:Irritant
 
Skin Absorption:Irritant
 
Inhalation:Irritant
 
Ingestion:Irritant
 
Cancer Information:Not Available
 
Birth Defects/Developmental Effects:Not Available
 

Section 3 - Composition/Information on Ingredients

Component CAS # ENIECS REACH Reg. No. Amount
 
2-Butoxyethanol 111-76-2 0 - 10%
Isopropyl Alcohol 67-63-0 0 - 5%
Sodium Hydroxide 1310-73-2 0 - 5%
Surfactant Blend 3 - 6%
Water 7732-18-5 80 - 100%

Section 4 - First Aid Measures

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
 
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
 
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
 
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.
 

Section 5 - Firefighting Measures

Extinguishing Media: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
 
Fire Fighting Procedures: May be combustible at high temperatures after all of the water has evaporated.
 
Unusual Fire and Explosion Hazards: Not available.
 
Hazardous Combustion Products: Not available.
 

Section 6 - Accidental Release Measures

Steps to be Taken if Material is Released or Spilled:
 
Personal Precautions: Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest. Do not breathe mist. If ingested, seek medical advice immediately and show the container or the label.
 
Environmental Precautions:
 

Section 7 - Handling and Storage

General Handling: Wear gloves that are impermeable to the product. Wear tightly sealed goggles.
 
Other Precautions:
 
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
 

Section 8 - Precautions to Control Exposure / Personal Protection

ComponentSourceTypeValueRemarks
2-ButoxyethanolOSHAPEL100 ppm
2-ButoxyethanolACGIHTLV100 ppm
Isopropyl AlcoholOSHAPEL400 ppm
Isopropyl AlcoholACGIHTLV200 ppm
Sodium HydroxideOSHAPEL1.22 ppm
Sodium HydroxideACGIHTLV1.22 ppm

Personal Protective Equipment (PPE):

Eye/Face Protection: Safety glasses.
 
Skin Protection: Lab coat. Gloves.
 
Respiratory Protection: Be sure to use an approved/certified respirator or equivalent.
 
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
 


Section 9 - Physical and Chemical Properties

Appearance: Liquid
 
Color: Clear
 
Odor: Slight, indescribable
 
Vapor Pressure: Not available
 
Boiling Point: Not available
 
Vapor Density: Not available
 
Freezing Point: Not available
 
Melting Point: Not available
 

Section 10 - Stability and Reactivity

Stability/Instability: Not available
 
Conditions To Avoid: Not available
 
Incompatible Materials: Not available
 
Hazardous Polymerization: Will not occur
 
Hazardous Decomposition Products: Not available
 

Section 11 - Toxicological Information

Ingestion Toxicity: Not available
Skin Absorption:Not available
Inhalation
Not available
 
Acute Dose
Not available
 
Repeated Dose Toxicity
Not available
 

Section 12 - Ecological Information

ECOTOXICITY
Not available
 

Section 13 - Disposal Considerations

Disposal Method:
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
 

Section 14 - Transport Information

DOT

Proper Shipping Name: Not Regulated
 

IMDG (Maritime transport)

Proper Shipping Name: Not Regulated
 

IATA (Air Transport)

Proper Shipping Name: Not Regulated
 

Section 15 - Regulatory Information

Superfund Amendments and Reathorization Act of 1986 (Emergency Planning and Community Right-to-Know Act of 1986) Sections 311 and 312

The following table list hazardous components and the regulatory lists for which they are required to be reported.

Section 16 - Other Information

Legend
ACGIHAmerican Conference of Governmental Hygenists
CASChemical Abstract Service
CFRCode of Federal Regulations
EPAEnvironmental Protection Agency
HMISHazardous Materials Identification System
IARCInternational Agency for Research on Cancer
LCLethal Concentration
LDLethal Dose
LTELLong Term Exposure Limit
MIRMaximum Incremental Reactivity
MSDSMaterial Safety Data Sheet
NFPANational Fire Protection Association
NIOSHNational Institute for Occupational Safety and Health
NTPNational Toxicology Program
OELOccupational Exposure Limit
OSHAOccupational Safety and Health Administration
PELPermissible Exposure Limit
RELRecommended Exposure Level
STELShort Term Exposure Limit
TLVThreshold Limit Value
TSCAToxic Substances Control Act
TWATime Weighted Average
VOCVolitile Organic Compounds

DISCLAIMER
This Safety Data Sheet (SDS) is prepared in compliance with GHS Hazcom 2012. The information may be based in part on information provided by component suppliers and is believed to be correct as of the date hereof. However, no warranty or merchantability, fitness for any use, or any other warranty is expressed or is to be implied regarding the accuracy of of this data, the results to be obtained from the use of the material, or the hazards connected with such use. Since the information contained herein my be applied under conditions beyond our control and with which we may be unfamiliar, and since data made available subsequent to the date hereof may suggest modification of the information, we assume no responsibility for the result of its use. This information and material is furnished on the condition that the person receiving it shall make his/her own determination as the the suitability of the material for his/her particular purpose and on the condition that he/she assume the risk of his/her use thereof.