Safety Data Sheet

According to GHS (Global Harmonized System) - Hazcom 2012
Date Printed (YYYY-MM-DD): 2020-02-25 

Section 1 - Product and Company Information

Product Name: Flex Filler 2 (A-Side)
Product Part Number(s): 2000-1A, 2000-CA, 2000-TA
Recommended Use: Flexible and Rigid Epoxy Filler for plastic.
Revision Date (YYYY-MM-DD): 2018-01-31

COMPANY IDENTIFICATION:EMERGENCY TELEPHONE NUMBER
Polyvance24 Hour Emergency ContactChemtrec - 1-800-424-9300 (Outside USA 703-527-3887)
1128 Kirk Rd.Customer Information Number256-638-4103 (7AM - 4PM (CST) M-F)
Rainsville, AL 35986
Information Email: info@polyvance.com

Section 2 - Hazards Identification

Appearance:White high viscosity liquid
Odor:Rotten cabbage smell (mercaptan)
Hazard Statement:
  May be harmful if swallowed. Causes skin irritation. Causes eye irritation. 
GHS Physical Hazard PictogramsGHS Health Hazard PictogramsGHS Environmental Hazard Pictograms
Not Applicable

Irritant		  
Not Applicable

GHS Hazards Statement Codes for This Product

Statement
Type		 Statement
Code		 Statement Text
Health H303 May be harmful if swallowed
Health H315 Causes skin irritation
Health H320 Causes eye irritation
Precautionary Statement:
  Keep out of reach of children. Read label before use. Do not get in eyes, on skin, or on clothing. 

GHS Precautionary Statement Codes for This Product

Statement
Type		 Statement
Code		 Statement Text
General P102 Keep out of reach of children
General P103 Read label before use
Prevention P262 Do not get in eyes, on skin, or on clothing

Potential Health Effects

Eye Contact:Skin: Slightly irritating. Prolonged exposure may cause allergic reaction in susceptible individuals. Eye: Mildly irritating.
 
Skin Absorption:Redness, allergy reaction, eczema, or skin conditions.
 
Inhalation:May result in irritation of nose, throat, and respiratory tract.
 
Ingestion:Slightly toxic. May cause irritation of throat, mouth, and gastrointestinal irritation.
 

Section 3 - Composition/Information on Ingredients

Component CAS # ENIECS REACH Reg. No. Amount
 
2,4,6 Tri(dimethylaminomethyl) Phenol 90-72-2 5 - 10%
Cellulose Fiber 65996-61-4 1 - 5%
DiVinyl Benzene 1321-74-0 1 - 5%
Formaldehyde Polymer 25155-81-1 1 - 5%
Fumed Silica 112945-52-5 1 - 5%
Mercaptan-terminated polymer Proprietary 50 - 60%
Talc 14807-96-6 20 - 30%
Thixotrophic Amide Wax 00110-30-5 1 - 5%
Titanium Dioxide 13463-67-7 1 - 5%

Section 4 - First Aid Measures

Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
 
Skin Contact: Wash with soap and water and rinse thoroughly.
 
Medical Conditions Aggravated by Exposure: Respiratory tract, skin and gastrointestinal irritation.
 

Section 5 - Firefighting Measures

Extinguishing Media: Foam, alcohol foam. CO2, Dry Chemical, Water Fog
 
Fire Fighting Procedures: Large fire - use self contained breathing apparatus
 
Unusual Fire and Explosion Hazards: None
 

Section 6 - Accidental Release Measures

Steps to be Taken if Material is Released or Spilled: Soak up with absorbent material and place in ventilated waste container for disposal.
 
Personal Precautions:
 
Environmental Precautions:
 

Section 7 - Handling and Storage

General Handling: Keep out of reach of children. Keep tightly closed. Eating, drinking, and smoking should be prohibited where there is potential exposure to toxic material. For professional use only. Not intended for sale to the general public.
 
Other Precautions:
 
Storage: Store in a cool, dry, well ventilated place. Keep tightly closedto prevent leakage and retain activity. Store away from open flames. Prevent skin and eye contact with appropriate clothing and safety glasses. Avoid inhalation of dust generated during machining after cure.
 

Section 8 - Precautions to Control Exposure / Personal Protection

ComponentSourceTypeValueRemarks

Personal Protective Equipment (PPE):

Eye/Face Protection: Safety glasses with side shields.
 
Skin Protection: Rubber or plastic.
 
Respiratory Protection: When used in confined area, an approved chemical/mechanical filter, designed to remove a combination of particles and vapors,should be used.
 
Hygenic Measures: Wash hands before eating, smoking, or using the washroom.
 
Other Protection Measures: Wear impervious clothing and boots. Eye wash stations and safety showers should be available.
 
Engineering Controls: Provide sufficient mechanical, general, or local exhaust.
 


Section 9 - Physical and Chemical Properties

Appearance: Almost white
 
Color: White
 
Odor: Mercaptan (rotten cabbage)
 
ph: No data available
 
Flash Point: 65°C (150°F)
 
Upper Flammable Limit: 6.2
 
Lower Flammable Limit: 0.7
 
Autoignition Temperature: No data available
 
Vapor Pressure: No data available
 
Boiling Point: No data available
 
Vapor Density: Heavier than air
 
Specific Gravity: 1.3
 
Freezing Point: No data available
 
Melting Point: No data available
 
Solubility in Water: Not Soluble
 
Evaporation Rate: No data available
 
Partition Coefficient: No data available
 
Decomposition Temperature: No data available
 
Visosity: No data available

Section 10 - Stability and Reactivity

Stability/Instability: Stable
 
Conditions To Avoid: Excessive heat, open flame
 
Incompatible Materials: Strong oxidizing agents, epoxy resins and amines.
 
Hazardous Polymerization: Will Not Occur
 
Hazardous Decomposition Products: CO, CO2, H2S, Oxides of sulfur and nitrogen
 

Section 11 - Toxicological Information

Ingestion Toxicity: No data available
Skin Absorption:No data available
Inhalation
No data available
 
Sensitization
No data available
 
Acute Dose
No data available
 
Repeated Dose Toxicity
No data available
 
Chronic Toxicity and Carcinogenicity
No data available
 
Corrosivity
No data available
 
Neurological
No data available
 
Reproductive Toxicity
No data available
 
Genetic Toxicity
No data available
 
Eye Irritation
No data available
 
Skin Irritation
No data available
 
Target Organs
No data available
 

Section 12 - Ecological Information

Movement & Partitioning
No data available
 
Persistence and Degradability
No data available
 
ECOTOXICITY
No data available
 
Bioaccumulation:
No data available
 
Other Adverse EffectsNo data available
 

Section 13 - Disposal Considerations

Disposal Method:
Dispose of in an approved chemical waste landfill or incinerate in accordance with applicable federal, state and local regulations. Do not contaminate lakes, streams, or other water supplies.
 
Container Disposal: Disposal must be made according to official regulations.
 

Section 14 - Transport Information

DOT

Proper Shipping Name: Adhesive NOI
 

IMDG (Maritime transport)

Proper Shipping Name: Adhesive NOI
 

IATA (Air Transport)

Proper Shipping Name: Adhesive NOI
 

Section 15 - Regulatory Information

Superfund Amendments and Reathorization Act of 1986 (Emergency Planning and Community Right-to-Know Act of 1986) Sections 311 and 312

The following table list hazardous components and the regulatory lists for which they are required to be reported.

Component: Mercaptan-terminated polymer
CAS Number: Proprietary
Amount: 50 - 60%
Mercaptan-terminated polymer is listed with New Jersey Right to Know.

Component: 2,4,6 Tri(dimethylaminomethyl) Phenol
CAS Number: 90-72-2
Amount: 5 - 10%
2,4,6 Tri(dimethylaminomethyl) Phenol is known to the State of California to cause cancer.
2,4,6 Tri(dimethylaminomethyl) Phenol is listed with Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA).

Component: Talc
CAS Number: 14807-96-6
Amount: 20 - 30%
Talc is listed with Pennsylvania Right to Know.
Talc is listed with Rhode Island Right to Know.
Talc is listed with Illinois toxic substances discloure to employee act.
Talc is listed with Minnesota Right to Know.

Component: Titanium Dioxide
CAS Number: 13463-67-7
Amount: 1 - 5%
Titanium Dioxide is listed with Pennsylvania Right to Know.
Titanium Dioxide is listed with Massachusetts Right to Know.
Titanium Dioxide is listed with Rhode Island Right to Know.
Titanium Dioxide is listed with Illinois toxic substances discloure to employee act.
Titanium Dioxide is listed with New Jersey Right to Know.
Titanium Dioxide is listed with Minnesota Right to Know.
Titanium Dioxide is listed with the Occupational Safety and Health Administration (OSHA) as a possible carcinogen.

Component: Cellulose Fiber
CAS Number: 65996-61-4
Amount: 1 - 5%
Cellulose Fiber is listed with Pennsylvania Right to Know.

Component: DiVinyl Benzene
CAS Number: 1321-74-0
Amount: 1 - 5%
DiVinyl Benzene is listed with Pennsylvania Right to Know.
DiVinyl Benzene is listed with Massachusetts Right to Know.

HMIS Rating (Scale 0 - 4)

HEALTH  1  Health = 1
FIRE  1  Fire = 1
PHYSICAL  1  Physical = 1
PERSONAL PROTECTION E Personal Protection = E

NFPA Ratings

 1 
1 1
Health = 1
Fire = 1
Reactivity =1

Section 16 - Other Information

Legend

DISCLAIMER
This Safety Data Sheet (SDS) is prepared in compliance with GHS Hazcom 2012. The information may be based in part on information provided by component suppliers and is believed to be correct as of the date hereof. However, no warranty or merchantability, fitness for any use, or any other warranty is expressed or is to be implied regarding the accuracy of of this data, the results to be obtained from the use of the material, or the hazards connected with such use. Since the information contained herein my be applied under conditions beyond our control and with which we may be unfamiliar, and since data made available subsequent to the date hereof may suggest modification of the information, we assume no responsibility for the result of its use. This information and material is furnished on the condition that the person receiving it shall make his/her own determination as the the suitability of the material for his/her particular purpose and on the condition that he/she assume the risk of his/her use thereof.