Safety Data Sheet

According to GHS (Global Harmonized System) - Hazcom 2012
Date Printed (YYYY-MM-DD): 2020-04-09 

Section 1 - Product and Company Information

Product Name: All Seasons Black Jack Primer
Product Part Number(s): 3043-1, 3043-4, 3043-5, 3043-D
Recommended Use: Primer Surfacer
Revision Date (YYYY-MM-DD):

Polyvance24 Hour Emergency ContactChemtrec - 1-800-424-9300 (Outside USA 703-527-3887)
1128 Kirk Rd.Customer Information Number256-638-4103 (7AM - 4PM (CST) M-F)
Rainsville, AL 35986
Information Email:

Section 2 - Hazards Identification

Appearance:Black Liquid
Hazard Statement:
 CAUTION! . May be harmful if swallowed. Causes skin irritation. Causes eye irritation.  

Signal Word:  

Signal Word Hazard:   Irritant - moderate respiratory
GHS Physical Hazard PictogramsGHS Health Hazard PictogramsGHS Environmental Hazard Pictograms
Not Applicable

Health Hazard

Not Applicable

GHS Hazards Statement Codes for This Product

Statement Text
Health H303 May be harmful if swallowed
Health H315 Causes skin irritation
Health H320 Causes eye irritation
Precautionary Statement:
 Keep out of reach of children. Do not get in eyes, on skin, or on clothing. IF ON SKIN: Wash with soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.  

GHS Precautionary Statement Codes for This Product

Statement Text
General P102 Keep out of reach of children
Prevention P262 Do not get in eyes, on skin, or on clothing
Response P302+352 IF ON SKIN: Wash with soap and water
Response P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing

Potential Health Effects

Eye Contact:Moderate irritation, redness, blurred vision.
Skin Absorption:Moderate irritation, vomiting, diarrhea
Inhalation:Nasal and respiratory irritation, headache, nausea.
Ingestion:Gastrointestinal irritation, vomiting, diarrhea

Section 3 - Composition/Information on Ingredients

Component CAS # ENIECS REACH Reg. No. Amount
2-Amino-2-Methyl-1-Propanol 124-68-5 0 - 3%
Barium Sulfate 13462-86-7 10 - 20%
Bentonite Clay 1340-68-7 1 - 3%
Carbon Black 1333-86-4 1 - 5%
Ethylene Glycol 126-86-3 0 - 3%
Hydrous Magnesium Silicate 14807-96-6 2 - 7%
Kaolin 1332-58-7 20 - 30%
Methyl-2-Pyrolidinone (M-Pyrol) 872-50-4 2 - 8%
Polyurethane dispersion resin 42074-68-0 25 - 30%
Water 7732-18-5 40 - 50%

Section 4 - First Aid Measures

Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Inhalation: In case of unconsciousness place patient stably in side position for transportation
Ingestion: Drink 1 or 2 glasses of water. Consult a physician if necessary. Never give anything by mouth to an unconscious person.
Medical Conditions Aggravated by Exposure: Dermatitis

Section 5 - Firefighting Measures

Extinguishing Media: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Fire Fighting Procedures: Thermal decomposition may generate toxic gases. Self-contained breathing apparatus with a full face piece operated in pressure demand is recommended. Water spray may be used to cool containers exposed to heat
Special Protective Equipment for Firefighters: Use self-contained breathing apparatus if necessary.
Unusual Fire and Explosion Hazards: Ammonia gas may be liberated at high temperatures.

Section 6 - Accidental Release Measures

Steps to be Taken if Material is Released or Spilled: Cover spill with absorbent material and shovel into waste disposal drum. Dispose of in accordance with state, federal, and local regulations. Dried material is not hazardous.
Personal Precautions: While wet, material is very slippery. Cover spills immediately with absorbent material.
Environmental Precautions: Do not allow to enter sewers/ surface or ground water.

Section 7 - Handling and Storage

General Handling: Keep out of reach of children. Keep containers closed when not in use. Do not transfer contents to other containers.
Other Precautions:
Storage: Store in cool, dry, well ventilated areas. Keep closure tight and containers upright to prevent leakage.

Section 8 - Precautions to Control Exposure / Personal Protection

Barium SulfateOSHAPEL15 mg/m3Total Dust
Barium SulfateOSHAPEL5 mg/m3Respirable Dust
Barium SulfateACGIHTLV10 mg/m3TWA
Bentonite ClayACGIHTWA3mg/m3Respirable particles
Bentonite ClayACGIHTWA10mg/m3Inhalable particles
Bentonite ClayOSHATWA5mg/m3Respirable fraction
Bentonite ClayOSHATWA15mg/m3Total dust
Carbon BlackACGIHPEL3.5 mg/m3TWA
Carbon BlackOSHAPEL3.5 mg/m3TWA
Hydrous Magnesium SilicateOSHATWA20 mppcf
Hydrous Magnesium SilicateNIOSHTWA2 mg/m3
KaolinOSHATWA5mg/m3Respirable dust
KaolinACGIHTWA2mg/m3Respirable dust
KaolinNIOSHTWA10mg/m3Total dust
KaolinNIOSHTWA5 mg/m3Respirable dust
KaolinOSHATWA15 mg/m3Total dust
Methyl-2-Pyrolidinone (M-Pyrol)WEELTWA10 ppm or 40mg/m3

Personal Protective Equipment (PPE):

Eye/Face Protection: Goggles or side-shielded safety glasses.
Skin Protection: Neoprene or butyl rubber gloves.
Respiratory Protection: Use of a NIOSH approved chemical/mechanical filter, designed to remove a combination of particles and vapor if application is by spraying.
Hygenic Measures: Wash hands before eating, smoking or using the bathroom
Other Protection Measures: To prevent repeated or prolonged skin contact, wear impervious clothing and boots. Wash contaminated clothing before re-use.
Engineering Controls: Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLV(s).

Section 9 - Physical and Chemical Properties

Appearance: Black liquid.
Color: Black
Odor: Characteristic
ph: Not determined
Flash Point: (m-pyrol) 194 F
Upper Flammable Limit: Not available
Lower Flammable Limit: Not available
Autoignition Temperature: Not available
Vapor Pressure: Not available
Boiling Point: Undetermined
Vapor Density: Heavier than air
Specific Gravity: 1.369
Freezing Point: Not available
Melting Point: Undetermined
Solubility in Water: Stable
Evaporation Rate: Not available
Partition Coefficient: Not available
Decomposition Temperature: Not available
Percent Volitiles: 53.01%
Volitile Organic Compounds (VOC): 0.51 lb./gal (61 g/l)
Visosity: Not available

Section 10 - Stability and Reactivity

Stability/Instability: Stable
Conditions To Avoid: Exposure to excessive heat. Use oldest material first.
Incompatible Materials: Oxidizing agents, strong acids
Hazardous Polymerization: Will not occur
Hazardous Decomposition Products: N/A

Section 11 - Toxicological Information

Ingestion Toxicity: No data available on the product itself
Skin Absorption:No data available on the product itself
No data available on the product itself
Repeated Dose Toxicity
No sensitizing effects known
Skin Irritation
Irritant to skin and mucous membranes

Section 12 - Ecological Information

Water hazard class 1 (self-assessment): slightly hazardous for water. Do not allow undiluted product or large quantities to reach ground water, water course or sewage system.

Section 13 - Disposal Considerations

Disposal Method:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Dispose of in accordance with local, state, and federal regulations. Do not contaminate lakes, streams, or other water supply.
Container Disposal: Disposal must be made according to official regulations.

Section 14 - Transport Information


Proper Shipping Name: Paint or Paint Related Material
Hazard Class: Not Regulated
ID Number: Not Regulated
Packing Group: Not Regulated
Additional DOT Shipping Information: Class 55, NMFC 149980 Sub 06

IMDG (Maritime transport)

IMDG Class: Not Regulated
UN Number: Not Regulated
Label: Not Regulated
Packaging Group: Not Regulated
Proper Shipping Name: Paint or Paint Related Material

IATA (Air Transport)

ICAO/IATA Class: Not Regulated
UN/ID Number: Not Regulated
Air Packaging Group: Not Regulated
Proper Shipping Name: Paint or Paint Related Material

Section 15 - Regulatory Information

Superfund Amendments and Reathorization Act of 1986 (Emergency Planning and Community Right-to-Know Act of 1986) Sections 311 and 312

The following table list hazardous components and the regulatory lists for which they are required to be reported.

Component: Methyl-2-Pyrolidinone (M-Pyrol)
CAS Number: 872-50-4
Amount: 1%
Methyl-2-Pyrolidinone (M-Pyrol) is known to the State of California to cause cancer.
Methyl-2-Pyrolidinone (M-Pyrol) is listed with Massachusetts Right to Know.
Methyl-2-Pyrolidinone (M-Pyrol) is listed with Pennsylvania Right to Know.
Methyl-2-Pyrolidinone (M-Pyrol) is listed with the Occupational Safety and Health Administration (OSHA) as a possible carcinogen.

Component: Kaolin
CAS Number: 1332-58-7
Amount: 24%
Kaolin is listed in SARA 313
Kaolin is known to the State of California to cause cancer.
Kaolin is listed with Massachusetts Right to Know.
Kaolin is listed with Minnesota Right to Know.
Kaolin is listed with Pennsylvania Right to Know.
Kaolin is listed with Rhode Island Right to Know.

Component: Texanol Ester Alcohol
CAS Number: 25265-77-4
Amount: 1%
Texanol Ester Alcohol is listed in SARA 313

HMIS Rating (Scale 0 - 4)

HEALTH  2  Health = 2
FIRE  1  Fire = 1
PHYSICAL  0  Physical = 0
PERSONAL PROTECTION E Personal Protection = E

NFPA Ratings

2 0
Health = 2
Fire = 1
Reactivity =0

Section 16 - Other Information

ACGIHAmerican Conference of Governmental Hygenists
CFRCode of Federal Regulations
DFGDeutsche Forschungsgemeinschaft
HMISHazardous Materials Identification System
IARCInternational Agency for Research on Cancer
MAKMaximum Allowable Concentration (German)
mppcfMillion Particles Per Cubic Foot
MSDSMaterial Safety Data Sheet
NFPANational Fire Protection Association
NIOSHNational Institute for Occupational Safety and Health
OELOccupational Exposure Limit
RCRAResource Conservation and Recovery Act
STELShort Term Exposure Limit
TLVThreshold Limit Value
TWATime Weighted Average

This Safety Data Sheet (SDS) is prepared in compliance with GHS Hazcom 2012. The information may be based in part on information provided by component suppliers and is believed to be correct as of the date hereof. However, no warranty or merchantability, fitness for any use, or any other warranty is expressed or is to be implied regarding the accuracy of this data, the results to be obtained from the use of the material, or the hazards connected with such use. Since the information contained herein my be applied under conditions beyond our control and with which we may be unfamiliar, and since data made available subsequent to the date hereof may suggest modification of the information, we assume no responsibility for the result of its use. This information and material is furnished on the condition that the person receiving it shall make his/her own determination as the suitability of the material for his/her particular purpose and on the condition that he/she assume the risk of his/her use thereof.