ALL SEASONS Waterborne Sealer
ALL SEASONS Waterborne Sealer
SKU:3050-1
FREE SHIPPING
Couldn't load pickup availability
ALL SEASONS Waterborne Sealer
ALL SEASONS Waterborne Sealer is a satin, freeze-tolerant sealer designed for finishing primed OEM and aftermarket plastic bumpers, as well as raw polyurethane bumpers. Compatible with all automotive topcoat systems, it dries quickly to a smooth, basecoat-ready finish.
From black to white, ALL SEASONS Waterborne Sealer can be sprayed right out of the can or mixed to any shade of gray for precise basecoat color matching.
Why Choose ALL SEASONS Waterborne Sealer?
- Wide Compatibility: Works with all common single-stage, base/clear, and waterborne automotive topcoat systems
- Eco-Friendly: Low VOC - only 1.55 lb/gal (185g/L)
- Superior Durability: Excellent adhesion and flexibility, as well as outstanding water and solvent resistance. ALL SEASONS SEALER will not lift if exposed to water after completely dried
- Zero Waste: 1K formulation means unused product can be poured back into the can, reducing waste and maximizing efficiency
- Quick Drying: Dries quickly to a smooth, basecoat-ready finish
- Freeze-Thaw Stability: Withstands up to 5 freeze-thaw cycles, maintaining reliable performance in various conditions
Application
Prepare surface by cleaning with 1000 Super Prep or 1001 EcoPrep, then scuff with a red scuff pad or sand with 400 grit sandpaper.
Stir ALL SEASONS Waterborne Sealer. Apply a medium wet coat with a base coat gun using a 1.3 mm nozzle. Ready to spray right out of the can. No additional water needs to be added, but if desired, ALL SEASONS Waterborne Sealer may be diluted with water to lower the spray viscosity. Orange peel disappears as it dries.
Allow to dry between coats. ALL SEASONS Waterborne Sealer may be top-coated at any time after it has completely dried. Dry time varies depending on temperature and humidity; allow at least 60 minutes at 72°F or 20 minutes at 180°F. If required, sealer may be nib sanded using 600 grit sandpaper
Clean spray gun with water, then rinse with acetone.
Product Specifications
Dry Time (Varies with Temperature & Humidity): ±60 min at room temperature, 20 min at 180°F
Viscosity Range: Product = 770 - 850 cps / Recommended = 800 cps
Spray Temperature: Product = 50°F - 90°F / Recommended = 72°F
Gun Nozzle Size: Product = 1.2 - 1.6 mm / Recommended = 1.3 mm
Dilution with Water: Product = 0% / Recommended = 0 - 5%
Product Resources
ALL SEASONS Waterborne Sealer SDS





