SMC Hardset Filler is a two-part epoxy system that is very rigid when cured. It’s great for repairs on SMC, fiberglass, polycarbonate, and other surfaces where a strong, high-impact-resistant material is needed.
What's Included?
Qty: 1 | 5 fl. oz. tube of Part A Qty: 1 | 5 fl. oz. tube of Part B
Product Specifications
Type: Two-part epoxy
Harness: 60 - 70 Shore D
Working Time: 7 minutes at 78°F (25.5°C)
Sand Time: 12 - 15 minutes @ 78°F (25.5°C)
Handling Strength: 30 minutes at 78°F (25.5°C)
Full Cure: 12 hours at 78°F (25.5°C)/ 30 minutes at 160°F (71°C)
Lap Shear Strength: 705 psi (on SMC substrate [substrate failed])
I have used your SMC epoxy filler to restore my boats cracked steering wheel and can tell you it worked perfectly.I'm very satisfied with your product.
A
Anonymous
Product worked as it should. Everything worked out good for. The ski the technical support that helped me with the knowledge of how to apply. It was excellent.
