The Kayak and Canoe Plastic Welder is a complete repair kit designed for making permanent repairs to cracked or damaged kayaks and canoes. These vessels often endure impacts from rough waters, rocky terrain, and narrow channels, leading to cracks and damage. Unlike short-term DIY fixes, this plastic welder creates strong, lasting repairs that restore the vessel’s functionality. The Kayak and Canoe Plastic Welder offers a reliable solution for extending the lifespan of well-used kayaks and canoes.
Why Choose the Kayak and Canoe Plastic Welder?
All-in-one kit: Includes airless plastic welder, welding tip, 30 plastic welding rods, reinforcing mesh, and welder stand
200-Watt Airless Welder: A powerful, easy-to-use tool that melts both the base plastic and the included welding rod for strong, seamless repairs
Precision Welding Tip: The flat surface smooths out welds for a clean finish, while the pointed end reaches into tight corners and curved areas for detailed work
Reinforced Strength: Includes stainless steel mesh that can be embedded into the plastic to strengthen high-stress areas and ensure long-lasting durability
Extend the Life of Your Gear: A cost-effective, eco-friendly solution to restore damaged kayaks and canoes and get you back on the water with confidence
Included Contents:
Qty: 1 | Airless plastic welder Qty: 1 | Tear Drop Welding Tip Qty: 30 | 12-inch-long polyethylene plastic welding rods (3/8" x 1/16" profile) Qty: 1 | Stainless steel reinforcing mesh (5" x 10") Qty: 1 | Airless welder stand
What's the Difference Between LDPE and HDPE?
The difference between LDPE (low density polyethylene) and HDPE (high density polyethylene) is the length of the molecule chains. HDPE has longer molecular chains than LDPE and the melting temperature of HDPE is often higher than that of LDPE.
LDPE's lower melting temperature usually makes using it as filler rod easier-to-use than welding HDPE filler rod to HDPE plastics.
HDPE is also "tougher" and more abrasion resistant than LDPE, but the practical difference is minimal when doing repair work. If you need the best wear characteristics and can live with making slower, more difficult welds, use HDPE rod. In most cases, we see better quality welds when using LDPE rod for typical crack or hole repair on boat hulls and ATV plastics.
Video - Kayak Repair
Video - Cosmetic Restoration of a Repaired Kayak
Product Resources
"The Book of Plastic Repair" is a comprehensive guide to identifying, repairing and refinishing virtually any plastic.
I had never plastic welded before, so this was a first for me. Watching the video on their website really helped me understand the process.
Before taking the kayak out on the water, I decided to test the repair by filling the hull with air and listening around the patched area for any leaks. After adding air for about 30 seconds to a minute, I stopped and checked the drain plug. All the air I put in came back out the same way, which was a good sign that there were no leaks.
The next step is to test it out on the water.
M
Mike
LDPE / Natural
Used it to repair my pontoon fuel tank and had no problems. Did a 2 psi pressure test on and no leaks where it was repaired. Your product saved me about 400.00 to replace the tank. I highly recommend your product. Mike K.
J
John
LDPE / Natural
Did a test drive and it heats and welds really good, just have to be patient and slow.
D
Danny
HDPE / Red
B
Buford
HDPE / Green
Arrived pretty quickly and works as described. Able to effect the repairs needed on the canoe. Thanks for a great product
