We help people repair plastic
Information
Bulk black ABS plastic welding ribbon
$84.95
Part No.:R03-04-08-BK
Weight: 10.00 LB
Length: 14.00 IN
Height: 6.00 IN
Width: 10.00 IN
Accepted Payments:
ABS is used in many interior plastics as well as motorcycle fairings. It is fairly hard, has a very distinctive smell when melted, smears and gets "hairy" when sanded at high speed. It does NOT have a waxy feel. Easy to weld using either Polyvance's airless plastic welder or when using a hot air plastic welder. Each rod is 1 ft. (30 cm) long and 3/8th inch (9.5 mm) wide by 1/16th inch (1.6 mm) thick. There are approximately 105 rods in one pound. (0.45 kg)
Minimum Order Quantity on Bulk Welding Rod is 10 pounds (4.5 kg)
How to Identify:
| Symbols | ABS (Acrylonitrile Butadiene Styrene) |
| Float Test: | Sinks |
| Burn Test: | Burns slowly with black smoke and soot. Does not drip while burning. |
| Example Marking(s): |   |
Float and Burn Test Result Video
Here is our Plastic Welding Rod Numbering Pattern:
(NOTE: Not all rod profiles and colors are available in all plastic types)
Click on image to enlarge.
High Resolution Image(s) (opens in a new tab/window)
