PROTEXB - Aerosol texture coating

ProTex aerosol texture coating provides a fast, even application. Two nozzles allow you to choose between fine and coarse textures. Ideal for bumper covers, interior parts, and more. Discover ProTex, the aerosol texture coating designed specifically for the demands of auto body repair and customization. With ProTex, you can match or create most texture, ensuring every vehicle leaves your shop looking flawless, whether it's a classic car restoration or a modern makeover. Easy application, professional results. In an industry where detail matters, ProTex gives you the control to deliver perfection. With its dual nozzles, you're equipped to handle any texturing challenge, turning repairs into masterpieces. Elevate your auto body shop's capabilities with ProTexL - where every spray counts.

Features and Benefits

• Two Nozzles - Red nozzle for a fine texture. White nozzle for a coarse texture.
• Suitable for interior and exterior.
• Ready to spray.
• Top coat for desired color.

How to apply

• Before applying texture coating, spray 1050-A Plastic Magic Adhesion Promoter.
• Spray PROTEXB Black Texture Coating Aerosol in light mist coats 12 to 24 inches (30 to 60 cm) from surface depending on desired texture.
• Apply additional coats in the same manner if needed to duplicate OEM texture.
• Be sure to apply lightly enough so that raised texture droplets do not flow together.
• Allow to completely dry before sanding. Sand surfaces with 320 - 800 grit or use a gray scuff pad depending on desired texture. Blow off and wipe with a tack rag.

High Resolution Image(s) (opens in a new tab/window)

High Resolution Image
High Resolution Image 2
High Resolution Image 3

This page was created on July 18, 2023