HDPE + GF15 plastic welding corner rod, 1/4" x 1/4", Bulk, Natural

If you have a broken plastic part that has the marking "HDPE+GF15", that tells you that the part is high density polyethylene with 15% glass fibers. It may have markings like "HDPE+GF20" or "HDPE+GF30" or some other number next to GF. Whatever number follows the "GF" is the percentage of glass fibers that are in the high density polyethylene (HDPE) plastic. Since HDPE+GF15 is the only glass-filled HDPE that we offer (for now) this would be your best option whenever you have a broken, glass-fiber reinforced high density polyethylene part.

Fiberglass reinforced HDPE is used to make reusable delivery totes among other things. These corner rods work well for flanges where two pieces meet at a 90 degree angle.

This package is sold in bulk with a 10 lb. (4.5 kg) minimum. Each rod measures 12 inches (30 cm) long, 1/4th inch (6.4 mm) wide x 1/4th inch (6.4 mm) "V"-shaped rod, and there are approximately 114 rods per pound.

How to Identify:

Float and Burn Test Result Video

Here is our Plastic Welding Rod Numbering Pattern:

(NOTE: Not all rod profiles and colors are available in all plastic types)

Click on image to enlarge

High Resolution Image(s) (opens in a new tab/window)

High Resolution Image

URER19-08-08-NT POLR19-08-08-NT URER19-08-08-NT R19-O8-O8-NT R19O8O8NT URAR19-08-08-NT sku R19-08-08-NT URR19-08-08-NT POLR19-08-08-NT plastic welding sticks URTR19-08-08-NT URT-R19-08-08-NT PLYR19-08-08-NT POL R19-08-08-NT US-R19-08-08-NT PVR19-08-08-NT URE-R19-08-08-NT PLVR19-08-08-NT PLV-R19-08-08-NT