Analog Nitro-Fuzer Nitrogen Plastic Welder

The 8000 Nitro-Fuzer® nitrogen plastic welder combines a simplified analog hot air plastic welder with a traditional airless plastic welder. By combining these welders in one package, it allows you to make quality welds to virtually any automotive plastic. This is a single gas plastic welder that can be placed on a workbench; simply connect a compressed air or nitrogen supply and a 120V power source and the welder is ready to use. It is designed to be used with compressed air, but it may be used with a nitrogen generator to make the strongest possible welds.

The 8000 Nitro-Fuzer® welder exemplifies simplicity of welding through technology. A precision flow control valve is combined with a flow gauge gives you the ultimate control over how much gas is used in the welding process. To help prevent burning out heating elements, a low-pressure safety switch is incorporated into the system. If the air flow drops too low, the switch automatically cuts off the power to the air heating element.

The integrated airless welder is ideal for smoothing out welds, repairing thermoset polyurethane, and adding reinforcing mesh to welded thermoplastic parts. It can also do double duty as a back-up to the hot air welder or be used by another technician for increased productivity.

Features:

• Easy-to-operate temperature controls.
• Analog flow gauge for repeatable performance every time.
• Element protection circuitry detects low pressure and shuts power off automatically if the pressure drops below the set-point to help prevent burning out heating elements
• Precision flow valve for fine welding gas control.
• Compact, easy-to-handle welding torch gets into tight spots minimizing user fatigue.
• Quick-change hose with integrated wires allows for field replacement in the unlikely event that the hose needs to be replaced.
• Easy-to-use, intuitive controls.
• Integrated airless welder control to allow for repair of thermoset PUR.
• Easily replaceable heating elements.
• Heavy-duty, made-in-USA enclosure for maximum durability.

Benefits:

• A nitrogen generator can be connected directly to the welder for making the best possible welds. A generator can also be used to air tires or supply gas to other apparatus requiring nitrogen.
• Speed: Complete repairs in a fraction of the time of 2-part adhesives. Weld 4 to 6 inches per minute, then immediately finish, prime, and paint. No waiting for adhesives to cure.
• Versatility: Do repairs that are not possible with adhesives. Mounting tabs (thick or thin), grille bars, high-stress areas, flexible tabs, and fender liners. Not just for automobile plastics.
• Cost Savings: An average 6-inch repair costs less than $2.00 when welded. With a 2-part adhesive, you pay more than that just for the mixing tip! The total cost of the same size adhesive repair can be over $40.00!
• Ease: Repairs are simple to do. Your techs already have the skill set, with this they have the tools.
• Estimating Options: Gives you more flexibility in the estimating process. Save total losses. Get an edge on the competition. A bargaining tool with insurance adjusters.
• Keep Profits in Your Shop: No need to replace bumpers, headlights, and other plastic parts. Keep the labor dollars in-house.
• Blend in the Panel: Repair the damage to the bumper and blend the color in the panel. Avoid the risks and costs involved with blending into the undamaged fenders.
• Insurance Relations: Show you are on the side of cost savings while increasing your profits at the same time. Do a QUALITY repair, become an ally of the adjuster, lower cycle times, and help drive additional work to your shop.
• Create Loyal Customers: 25% of a shop’s business is customer pay. Save them money on the small hits and they will return to your shop with the big hits.
• Revolutionize the Repair Process: As body filler replaced lead, as the wire feed welder replaced brazing, the nitrogen welder will replace all other types of plastic repair.
• Avoid Fit Issues: Why put on an aftermarket cover when you can easily repair the OE?
• Plastic Use to Grow: The amount of plastic parts on cars will continue to grow. This means more repair opportunities.
• Factory Support: Plastic is what we do at Polyvance. For over 30 years we have been the leader in product development and problem-solving. We have the proven products you need from start to finish. Plastic repair doesn't have to be difficult.

Contents of Oganizer Case

• 30 pieces of R02-01-XX-NT - Polypropylene, 1/8 inch (3mm) diameter, Natural
• 30 pieces of R02-04-XX-NT - Polypropylene, 3/8 inch (9.5mm) X 1/16 inch (1.6mm), Natural
• 15 pieces of R02-05-XX-NT - Polypropylene, 5/8 inch (15.8mm) X 1/16 inch (1.6mm), Natural
• 30 pieces of R02-07-XX-NT - Polypropylene, 13/64 inch (5mm) X 1/16 inch (1.6mm), Natural
• 15 pieces of R02-08-XX-NT - Polypropylene, 1/4 inch (6mm) X 1/4 inch (6mm) Corner Rod, Natural

Other included welding rod (not in an organizer case)

• 15 pieces of R02-01-XX-BK - Polypropylene, 1/8 inch (3mm) diameter, Black
• 15 pieces of R03-01-XX-WH - ABS, 1/8 inch (3mm) diameter, White
• 15 pieces of R04-01-XX-NT - Low-density Polyethylene (LDPE), 1/8 inch (3mm) diamter, Natural
• 15 pieces of R05-01-XX-GY - TPO, 1/8 inch (3mm) diameter, Gray
• 15 pieces of R06-01-XX-NT - Nylon, 1/8 inch diameter, Natural
• 4 pieces of R07-01-XX-NT - Polycarbonate, 1/8 inch (3mm) diamter, Natural

High Resolution Image(s) (opens in a new tab/window)

High Resolution Image

URE8000 POL8000 urethane supply company nitrogen plastic welder URA8000 694687006105 B07XZKKQMW sku 8000 UR8000 POL8000 URT8000 URT-8000 PLY8000 setting up the 8000 nitrogen welder POL 8000 US-8000 PV8000 UPC694687006105 URE-8000 PLV8000 PLV-8000