Nylon Welding Rod 3/8" x 1/16" Bulk - Natural

Nylon is a plastic with a very high melting point and is used in places where high temperatures are present, like radiator tanks and intake manifolds. Nylon has a very distinct smell when melted. Because of the high melting point of nylon, it is often necessary to preheat the area you are going to weld with a heat gun. This will make welding much quicker. Because of the pressure and temperatures on nylon radiator tanks, it is very important that the rod fuse with the base material. Anything less than a complete fusion repair will result in a money-losing comeback job. This is a 1 lb. (0.45 kg) package. Each rod is 1 ft. (30 cm) long and 3/8th inch (9.5 mm) wide by 1/16th inch (1.6 mm) thick. There are approximately 126 welding rods in 1 lb. (0.45 kg). There is a 10 lb. (0.45 kg) minimum order on bulk welding rod.

How to Identify:

Float and Burn Test Result Video

Here is our Plastic Welding Rod Numbering Pattern:

(NOTE: Not all rod profiles and colors are available in all plastic types)

Click on image to enlarge

High Resolution Image(s) (opens in a new tab/window)

High Resolution Image

URER06-04-08-NT POLR06-04-08-NT R060408NT URER06-04-08-NT RO6-O4-O8-NT RO6O4O8NT URAR06-04-08-NT sku R06-04-08-NT URR06-04-08-NT POLR06-04-08-NT plastic welding sticks URTR06-04-08-NT URT-R06-04-08-NT PLYR06-04-08-NT POL R06-04-08-NT US-R06-04-08-NT PVR06-04-08-NT RO6-04-08-NT URE-R06-04-08-NT PLVR06-04-08-NT PLV-R06-04-08-NT