Polypropylene Corner Rod, 30 ft., Natural

We found the stickiest PP resin on the market and extrude it into a 90 degree, V-shaped profile that's 1/4" (6.4mm) on each of the sides. These rods are very convenient when welding flanges on bumper covers or any other time that you need to weld 2 pieces of at a 90 degree angle. This rod comes conveniently packaged as a 30 foot (9.1 m) pack. Each stick is 1 foot (30.5 cm) long and there are 30 sticks in one pack. There are approximately 132 sticks per pound. Use this rod with a hot air welder for welding up bumper covers made from PP blends (TPO, TEO, PP/EPMD, etc.) This rod is the NATURAL color. No pigment has been added.

How to Identify:

Symbols	PP
Recycle Symbol:
Float Test:	Floats
Burn Test:	Burns quickly with little smoke. Drips while burning.
Example Marking(s):

Float and Burn Test Result Video

Here is our Plastic Welding Rod Numbering Pattern:

(NOTE: Not all rod profiles and colors are available in all plastic types)

Click on image to enlarge.

High Resolution Image(s) (opens in a new tab/window)

High Resolution Image