We help people repair plastic
Polyvance is closed May 26 in observance of Memorial Day.
Information
All Seasons Waterborne Flexible Bumper Sealer
$42.95
Part No.:3050-4
Weight: 2.78 LB
Volume: 1 quart
Length: 4.25 IN
Height: 4.75 IN
Width: 4.25 IN
UPC: 694687002961
Accepted Payments:
All Seasons Waterborne Bumper Sealer - White
Polyvance's ALL SEASONS Waterborne Sealer is a satin, freeze-tolerant waterborne sealer for finishing primed OEM and aftermarket plastic bumpers, and raw polyurethane bumpers.
ALL SEASONS Waterborne Sealer is compatible with all automotive topcoat systems and dries quickly to a smooth basecoat-ready finish. Because it was designed to be sprayed over questionable waterborne primers used on aftermarket bumpers, you can have the confi dence that the sealer will provide a durable barrier coat for any basecoat paint. From black to white, ALL SEASONS Sealer can be sprayed right out of the can or mixed to any shade of gray required for basecoat color matching
Benefits:
- Excellent adhesion and durability.
- 1K product, means no waste. What you don’t use, pour back into the can.
- Outstanding solvent and water resistance. ALL SEASONS SEALER will not lift if exposed to water after completely dried.
- Freeze-Thaw Stable: Passes 5 freeze-thaw cycles.
- Compatible with all common single-stage, base/clear and waterborne automotive topcoat systems.
- Outstanding flexibility.
- Simple to use.
- Low VOC. Only 1.55 lb/gallon (185g/L)
Application:
- Prepare surface by cleaning with 1000 Super Prep Plastic Cleaner, then scuff with a red scuff pad or sand with 400 grit sandpaper.
- Stir ALL SEASONS Waterborne Sealer. Apply a medium wet coat with a base coat gun using a 1.3 mm nozzle. ALL SEASONS Waterborne Sealer is ready to spray right out of the can. No additional water needs to be added, but if desired, ALL SEASONS Waterborne Sealer may be diluted with water to lower the spray viscosity. Orange peel disappears as it dries.
- Allow to dry between coats. ALL SEASONS Waterborne Sealer may be top coated at any time after it has completely dried. Dry time varies depending on temperature and humidity; allow at least 60 minutes at 72°F (22°C) or 20 minutes at 180°F (82°C). If required, sealer may be nib sanded using 600 grit sandpaper.
- Clean spray gun with water, then rinse with acetone.
Dry Time (Varies with temperature and humidity)
| Dry Time | |
|---|---|
| Room Temperature | ±60 minutes |
| 180°F (82°C) | 20 minutes |
Product Recommendations
| Product | Recommended | |
|---|---|---|
| Viscosity Range | 770-850 cps | 800 cps |
| Spray Temperature | 50°F - 90°F (10°C - 32°C) | 72°F (22°C) |
| Gun Nozzle Size | 1.2 - 1.6 mm | 1.3 mm |
| Dilution with water | 0% | 0 - 5% |
High Resolution Image(s) (opens in a new tab/window)
