Plastic repair GURUS since 1981
Nitro Fuzer Lite
Length: 36.00 IN
Height: 16.50 IN
Width: 18.50 IN
Visa, MC, American Express, Discover, PayPal
The 6049-C Nitro Fuzer Lite Plastic Welding System combines a simplified nitrogen welder with a traditional airless plastic welder. By combining these welders into one package, it allows you to economically make nitrogen welds to virtually any automotive plastic.
The Nitro Fuzer Lite is designed to be used with compressed air and a nitrogen bottle to make the strongest possible welds, or it can be used with the optional 6066 Nitrocell nitrogen generator for a limitless supply of nitrogen.
Unlike some competitive products, the 6049 features precision flow control so the user can match the flow and temperature to substrate types and thicknesses. The flow and temperature can be reduced to a very low point in order to weld thin, fragile substrates, something others cannot do. However, when welding very thick substrates and needing a little extra push, the temperature and flow can be increased greatly, to allow more heat to be transferred to the weld.
A flow gauge gives the welder a repeatable reference over how much gas is used in the welding process. To extend heating element lifespan, a low-pressure safety switch is incorporated into the system, shutting off the power to the heating element if the air flow drops below a safe level.
The integrated airless welder is ideal for smoothing out welds,repairing thermoset polyurethane, and adding reinforcing mesh to welded thermoplastic parts.
In order to reduce the cost of the welder, the welder and cart will be shipped in two boxes. This means the cart will need to be assembled. We have detailed instructions in the box, as well as a video, to help you assemble the cart.
Setup and Use Video
High Resolution Image (opens in a new tab/window)